Related Topics
			> Reseller UK > International Forum > Allplan 2005 - System Requirements > Recommended Graphics Cards > Handbook and Demo Data Downloads
	Nemetschek.com -> Service Overview -> Service
	System Requirements for Allplan 2006
	Hardware Requirements Minimum Hardware Requirements INTEL Pentium III 1 GHz or faster or compatible 512 MB RAM (256 MB if display list is not used) 1 GB free space on the hard drive and 400 MB on the system drive CD-ROM drive (for the installation) If a hardlock istallation is carried out: 1 parallel or USB port Graphics card 32 MB, Resolution 1024 x 768 19" Monitor 1024 x 768 Netword card (for network usage) 3-button mouse Disk drive, network- or email connection (for the installation of the licence) Recommended Hardware Setup (recommended if new hardware is to be purchased) INTEL Pentium 4 compatible Processor speed 3 GHz or faster 1 GB RAM 10 GB free space on the hard drive and 400 MB on the system drive CD-ROM or DVD drive (for the installation) If a hardlock istallation is carried out: 1 parallel or USB port CAD-Graphics card with full OpenGL support 21" Monitor with 1600 x 1200 resolution or 19" TFT PCI Netword card (for network usage) 5-button mouse with mouse-wheel Data backup drive (CD RW, DVD RW drive) Graphic Cards in Detail Current Information regarding suitable graphics cards for Allplan from V 17 can be obtained by clicking here. Software Requirements Allplan 2006 is quality tested for the following operating systems: Windows XP Home and Professional, Service Pack 2 Windows 2003 Server Windows 2000, Service Pack 4 Additional data storage systems from Allplan V2005.0a: Novell Version 6.5 with NetWare Services SUSE Linux 9.1 with Sambaserver 3.0 on a Reiser Filesystem Recommendation: We recommend the operating system Windows XP Professional for use in a professional CAD workstation with Allplan 2006. Additional Requirements The following additional requirements must also be fulfilled: The operating system must be installed and running correctly The hardware and software requirements listed above must also be fulfilled for computers acting as a data server for an Allplan 2006 installation. All peripheral devices must be connected, correctly configured and the required drivers installed. A functional network at operating system level is required for the installation of two or more Allplan 2006 seats in a network installation. Processor Compatibility It is important that the SSE (Streaming SIMD Extensions) instructon set is supported by the processor in order for Allplan to run. If you are unsure whether your current processor is suitable for use with Allplan 2005 then carry out the following test. The attached tool ssetest.exe enables you to check whether the processor in your computer complies with the minimum specification to run Allplan i.e. support of the SSE instruction set. Make a new folder in Windows Explorer e.g. c:\Test and copy the file ssetest.exe into this folder. Open the prompt entry window (via Start -> Ausführen -> enter CMD -> OK) and change to the new folder that you have just made by entering cd c:\Test Confirm the entry with Return Enter ssetest Return If the result is "->1", then the processor supports the SSE instruction set and is suitable for use with Allplan 2005 If the result is "->0", then the processor does NOT support the SSE instruction set and is NOT suitable for use with Allplan 2005
	© 2008 Nemetschek AG * All rights reserved.				Imprint